Stránka 1 z 3

Avia BH-3

PříspěvekNapsal: 20 led 2009, 12:15
od Dric
Dobrý den!

I would like to share with you the progress of my 1/48 Avia BH-3.
by looking on the forum I found, but to late :shock: soem premium informations about the layout of the cockpit of this nice small aircraft.
I'm now in the process of light modifications to try to conform a little bit more the inside of the model to the plans :-D .
One thing is anyway sure, I will keep the floor, and the seat and the joystik as they are now.
I changed the position of the "syringe" and add a compass, a magneto ignitor and the command for the radiator. I will make some other pictures when I finished the new layout.

I used plasticart for the side panels and some photoetched parts for the seat and seatbelts. Joystik is done with coper wire and metal sheet.

Lets'go for the pictures.

the seat with a magic sculp cushion
[ Externí obrázek z nezabezpečeného zdroje ]

a small look inside, but as I write I changed latter the position of some elements and add some other


The joystik
[ Externí obrázek z nezabezpečeného zdroje ]


The seat "in place" The big pink things are my fingers :lol:
[ Externí obrázek z nezabezpečeného zdroje ]

another point of view
[ Externí obrázek z nezabezpečeného zdroje ]

Finaly not so much will be visible across the man hole, but as usual, we know it's here :)

Cheers to all

Cedric

Re: Avia BH-3

PříspěvekNapsal: 20 led 2009, 14:03
od Peter DeSnek
Hi Cedric, greeting to Switzerland,

Your work looks nice ... And I'm glad that you are publicating your modeling on ModelForum.
If you'll need any help with translating some Czech language sentences, please, ask ...
Don't worry ... we could help you ...

:wink: :wink: :wink:

Re: Avia BH-3

PříspěvekNapsal: 20 led 2009, 16:15
od pooky
Nice progress. Post another pics asap....

Re: Avia BH-3

PříspěvekNapsal: 20 led 2009, 19:56
od komisař
Excellent work in cockpit! :shock:

Re: Avia BH-3

PříspěvekNapsal: 24 led 2009, 18:44
od Dric
Thanks for your comments friends. I add some pictures of the last work.
After I find on the forum a draw of the cockpit I modify a little bit the layout of cockpit and lateral panels.

I scratch new benzin switches for the instrument panel
[ Externí obrázek z nezabezpečeného zdroje ]

the engine throtle
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]

instrument panel with the new position of the serynge. The white places are the futur position of switches
[ Externí obrázek z nezabezpečeného zdroje ]

and mofify the position of the joystick.
[ Externí obrázek z nezabezpečeného zdroje ]

Cheers

Dric

Re: Avia BH-3

PříspěvekNapsal: 31 bře 2009, 12:23
od Dric
Hello all,

I made some progress in the BH.3 construction, and I try to modelize the retractable radiator. Moreover as I have seen on a plan of the BH.3 (downloaded on this forum) the piece of the kit is to wide.

At first I find a photoetch hexagonal net with 0.3mm holes.
I cut in the photoetch regular parts with my "template". In fact a plastic stop glued on a metal block. Another plastic part is used as a rule.
[ Externí obrázek z nezabezpečeného zdroje ]

After that I build my radiator by stacking the photoetched parts. For this I used another "template" to be sure that the holes are aligned.
[ Externí obrázek z nezabezpečeného zdroje ]

The photoetched parts are glued together with a cyano gel (gel is important to avoid a to liquid glue that will fill the hole).
A little bit of work wit a file, a folded brass piece around the photoetched parts, et voilà. A new radiator at the left and the original one at the right.
[ Externí obrázek z nezabezpečeného zdroje ]

What do you win with that ?
The radiator is "transparent" as you can see on the last picture
[ Externí obrázek z nezabezpečeného zdroje ]

Thanks for looking

Cheers

Cedric

Re: Avia BH-3

PříspěvekNapsal: 31 bře 2009, 14:19
od DanV
Great work,Cedric =D>

Re: Avia BH-3

PříspěvekNapsal: 31 bře 2009, 16:13
od komisař
Good idea, Cedric! ;-I

Re: Avia BH-3

PříspěvekNapsal: 16 zář 2009, 09:54
od Dric
Some news (since time :D )
At first I opened holes for small a view on the motor and localisation of the radiator
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
And then buil an optic cache for a part of the motor. On the final paint job I put the BMW sigle on the right way :-D
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]

I work on wings too to give the diedral and the small gap from wings to fuselage. I had to remove resin in respect with the fuselage curve and the diedral at the root of the wing. So I made a template for this job.
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]

The model is heavy, and the resin legs of the undercariage will be certainly to flexible to support the weight of the finished model. So I made news from brass.
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]

I saw from this point that I made a mistake for the deign of the legs as i use pictures from a BH.5 for the undercariage legs, and it seem that the suspension system was a little bit different. I changed the shape of the legs and welded the parts. (I still need deburring welds :D )
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
[ Externí obrázek z nezabezpečeného zdroje ]
I work too to finalize the radiator and made a couple of pictures during a "test fitting" session.

Thanks for looking

Cedric

Re: Avia BH-3

PříspěvekNapsal: 16 zář 2009, 19:36
od komisař
Cedric :shock: ;-I very nice!

Re: Avia BH-3

PříspěvekNapsal: 16 zář 2009, 19:51
od Martin Jursa
great build

Re: Avia BH-3

PříspěvekNapsal: 16 zář 2009, 19:54
od Erich Súňai
Nie som lietadielkár,ale naozaj som sám čo sa cíti blbo že anglicky musí zistovat ako sa stavia Avia BH 3?? Ale vypadá to dobre! :P

Re: Avia BH-3

PříspěvekNapsal: 17 zář 2009, 12:11
od 172flogger
Nice work.
But please reupload images directly to Modelforum.
Your old pictures at external servers not working.

Re: Avia BH-3

PříspěvekNapsal: 18 zář 2009, 12:28
od Dric
Thanks to all for the comments, even if I don't understand all :-D

172flogger píše:Nice work.
But please reupload images directly to Modelforum.
Your old pictures at external servers not working.


I put back the picture by changing the format, it must be lighter now 8-[

Cheers Cedric

Re: Avia BH-3

PříspěvekNapsal: 20 kvě 2010, 10:48
od Dric