T-34 Russian Winter 1/72

[SvS]

From the beginning of the disease models, I loved winter theme (winter favorite time of year). First snow made from foam, then learned about soda, but it interfered with glue star. And a good winter knit them anything. Time passed and I now have the technology and tools to create winter.
The work that started to consolidate the experience of working with tempera PVA as a whitewash. Until then tried to use a 35 scale, but not entirely successful. I chose tempera to create a white lump in the first place because of its properties: dries quickly and is washed off with water.
Creating model passed without problems, a little putty and order. First used glue "Akan pros, very thin and dries quickly. Since I glue a toothpick was very difficult for him to get out of jars. Replaced on the grid above the motor plate to a product of ACE, the mandrel left home. Rassverlil barrels of the guns and nozzles. Put the headlamp from Elf and held her posting.
Blew out the basic model in the XF-58, then brighten up a bit with a mixture of XF-58 (olive green) and XF-3 (flat yellow). Blew out the running gear XF-52 (flat earth). Model covered gloss varnish X-22. Now you can apply tempera (in a matte surface temperature simply absorbed). The paint is diluted to a state of white water. Nanoshu I paint randomly over the entire surface (should remove excess moisture from the brush to paint on the tank was not going to drop). We must avoid the appearance of white spots, are formed when a thick layer of paint dries. After drying, the temperature is not washed off by water, only alcohol, but in my case it is contraindicated. In white, you can add different colors to your liking. The number of layers of white are regulated by eye. When the paint dried you can do a little rubbing to the base in water soaked cotton swab. Finding a well-worn, seen on the front photo. Sharpened toothpick made chips and white obodrannosti. Make a little shading with oil. Tempera paint stains and colored small things. Running gear processed pigments and tempera.
Mixed soda, water, white acrylic and PVA to create snow. Liquid mixture inflicted on the model and poured soda, too much blew.
Stands molded from plaster. As the molds used packaging from a CD-R 10 pieces. Overwhelmed volume is not necessary chopped runner, so in which case the foundation is not collapsed. Blew out the ground in XF-52 (flat earth), and sprinkled with snow. While the snow did not grabbed gauge.
Put haystack (crushed and painted sisal), planted grass. Scattered a little hay, according to legend, the tank brushed stog.Prisypal all snow track.

Přílohy

[J. K.]

Very nice.

[SvS]

Спасибо

[Michal Kalina]

pekne, len jedna vec, neviem, co to skresluje fotka, ale rusi maju taky zmrznuty sneh, krystalicky, skus povrch posypat solou, inak pekne

[nganasan]

Model je hezkej, ale ta kupka sena vypadá, jak kdyby jí tam složili až potom, co napad sníh. Ta tam má být jako pro lesní zvěř, nebo by to měla být kupka sena, která tam byla už když začal padat sníh?

[nganasan]

Its good. I have one knock only : the haycock is standing on the snow? I think i has to be under the snow..

[jakub.sumbal]

jo za ten text v AJ sem fakt moc rad