Diskusní fórum modelářů

Chcel by som vedieť, ktoré verzie tohto lietadla lietali so žltými krídlami. Viem že SBD - 1 určite, ale neviem či nie aj dvojky... Ďalej by som chcel vedieť aké rozdiely sú vo výliskoch stavebnice 1/48 od Hasegawy medzi jednotlivými verziami, či sa dá aj z neskorších verzií postaviť jednotka alebo dvojka. Na toto lietadlo niesom odborník... Ďakujem.

Dobrý den,

"yellow wings" byly i dvojky. Dokonce je známá fotka na trup dvojky kdesi v USA, kdy je kokpit zelený (v yellow wings éře byly kokpity aluminium laquer). Pokud si dobře pamatuji, tak jednička od gawy je doplněná o rezinový vstup na 12-té hodině na motorovém krytu. Jedničky jsou též s jednoduchým kulometem na místě střelce. Zkuste In action, tam to bude vysvětlené.

Michal

ještě pro základní info...

• BT-1 - Initial Northrop Prototype Model Designation.
• XBT-2 - Initial Douglas / Northrop Prototype Model Designation; fitted with 1,000hp Wright R-1820-32 Cyclone engine.
• SBD-1 - Armed with 2 x fixed 7.62mm machine guns and 1 x trainable 7.62mm machine gun; 57 produced.
• SBD-2 - Increased fuel capacity; revised weaponry; 87 produced.
• SBD-3 - Fitted with Wright R-1820-52 powerplant; 584 produced; bulletproof windscreen; self-sealing fuel tanks; increased armor protection for crew; increased fuel capacity; fitted with 2 x 12.7mm machine guns and 2 x trainable 7.62mm machine guns.
• SBD-4 - Improved electronics; 780 produced.
• SBD-5 - Fitted with 1,200hp Wright R-1820-60 powerplant; increased ammunition capacity; 3,025 produced.
• SBD-6 - Fitted with Wright R-1820-66 powerplant; increased fuel capacity.

M.

finální info:

HASEGAWA 1/48 DOUGLAS SBD DAUNTLESS
09119
JT19
SBD-3
Dauntless
A,B,C,D,Ex2,F,G,J,K,N,P,Q,R,S,U

09120
JT20
SBD-4
Dauntless
A,B,C,D,Ex2,F,G,J,L,N,P,Q,R,S,U

09169
JT109
SBD-3
Dauntless ‘USS Enterprise’
A,B,C,D,Ex2,F,G,J,K,N,P,Q,R,S,U,X,MA

09179
JT119
A-24A
Dauntless ‘U. S. Army’
A,B,C,D,Ex2,F,G,J,K,N,P,Q,R,T,U

09430
none
SBD-3
Dauntless ‘Midway’
A,B,C,D,Ex2,F,G,J,K,N,P,Q,R,S,U,X,MA

09625
none
SBD-1
Dauntless ‘Yellow Wing’
A,B,C,D,Ex2,F,G,J,K,N,P,Q,R,S,U,X,MA,UR




SBD Dauntless Tree Letter Descriptions:

A
3 parts, left fuselage, cockpit side wall and seat armor

B
3 parts, right fuselage, cockpit side wall and seat armor support

C
4 parts, upper wings, cockpit floor and bulkhead

D
1 part, lower wing

E
11 parts, main gear, horizontal stabilizer, bomb fins, other details

F
8 clear parts, canopy parts, landing light covers

G
1 part, cowling

J
3 parts, forward fuselage

K
1 part, variable speed propeller

L
1 part, H-S constant speed propellor

N
14 parts, cockpit and other details

P
4 poly caps

Q
8 parts, bomb crutch, 500 lb bomb body, twin .30 MGs, tail hook, exhausts

R
8 parts, engine, pitot tube, antenna, wing pylons, other details

S
1 part, carrier tail wheel

T
1 part, land based tail wheel

U
4 parts, instrument panel, bomb recess cover panel, main gear doors

X
1 part, dorsal fairing for middle etched dive brake

MA
MA-045, 63 etched parts for perforated flaps and dive brakes

UR
2 resin pieces, SBD-1 cowl intake




Dive brake perforations are molded solid, can be drilled out by modeler, there are aftermarket sets with detailed dive brakes for the kits that do not come with them. 09119 SBD-3 is basic kit, has later twin .30 cal MGs. Similar 09169 and 09430 also include etched detailed dive brakes. 09625 is based on these and includes resin earlier SBD-1 carburetor intake, modeler must remove the later one from the cowl. 09120 has H-S prop, does SBD-4 only. 09179 is noteworthy, includes same parts as SBD-3 except has the larger pneumatic tail wheel for land based use (but no carrier tail wheel), the only source of this tail wheel in 1/48, used on many later Marine SBDs based on Pacific islands. However, the A-24A was based on the SBD-4 which had H-S prop, so either the kit is wrong or props were changed on some A-24As, my references are no help on this one…does anyone have any additional data?

NEED INFO: None

Ďakujem veľmi pekne za odpoveď !